# CC496K tin bronze CuSn7Pb15-C tin bronze rod

CC496K tin bronze CuSn7Pb15-C tin bronze rod
The density of tin bronze is bronze with 3% to 14% tin, and phosphorus, zinc, lead and other elements are often added. It is the earliest alloy used by human beings, and it has been used for about 4,000 years. It is corrosion-resistant, wear-resistant, has good mechanical properties and process properties, and can be welded and brazed well, and does not produce sparks when impacted. Divided into processed tin bronze and cast tin bronze. The tin content of tin bronze used for pressure processing is less than 6% to 7%, and the tin content of cast tin bronze is 10% to 14%.

Commonly used grades are QSn4-3, QSn4.4-2.5, QSn7-O.2, ZQSn10, ZQSn5-2-5, ZQSn6-6-3 and so on. Tin bronze is a non-ferrous metal alloy with low casting shrinkage, which can be used to produce castings with complex shapes, clear outlines and low air tightness requirements. Tin bronze is very resistant to corrosion in the atmosphere, sea water, fresh water and steam, and is widely used in steam boilers and marine ship parts. Phosphorus-containing tin bronze has good mechanical properties and can be used as wear-resistant parts and elastic parts of high-precision machine tools. Lead-containing tin bronze is often used as wear parts and sliding bearings. Cast copper alloy has high hardness, excellent wear resistance, is not easy to cause seizure, has good casting performance and cutting performance, and has good corrosion resistance in the atmosphere and fresh water. Such as connecting rods, bushings, bearing bushes, gears, worm gears, etc.

CC496K Copper alloy CC496K tin bronze

Supply CC496K copper alloy plate, CC496K copper alloy rod, CC496K copper alloy tube and CC496K copper alloy sleeve

CC496K /CC496K /CC496K tin bronze

CC496K cast copper alloy has high hardness, good wear resistance, is not easy to produce biting phenomenon, has better casting performance and cutting performance, in the atmosphere and fresh water

It has good corrosion resistance. ZCuSn1 0Pb1 cast copper alloy can be used for high load (up to 20MPa) and high sliding speed (8m/s) of the wear-resistant zero

Parts, such as connecting rod, bushing, bearing bush, gear, worm gear, etc.

Supply tin-phosphorus bronze: CC496K00/SAE660, CC496K/SAE64, C54400, C51000,

C52100, C48500, C46200, CC496K, etc.

Copper base bearing alloy has high fatigue strength and load bearing capacity, excellent wear resistance, good thermal conductivity and low friction coefficient. Can work properly below 250'C, suitable for

Manufacture bearings that work under high speed and heavy load, such as bearings of high speed diesel engine aero engine, etc., commonly used brands are CC496K, ZCuPb30.